If soil and water are contaminated with MTBE, a MTBE treatment can be used. If MTBE touches water, then the water becomes non-potable. It gives water an unpleasant taste. This happens even at very low concentrations. That is why it can render large quantities of water non-potable. Which MTBE treatment to use is dependent upon what is contaminated; water, soil or anything else. Based on this information an appropriate MTBE treatment is suggested. If it contaminates water it’s not only hazardous for the environment, but also for the people living in this environment that are dependent upon this water for drinking water.
Why a MTBE treatment?
Why would anyone use a MTBE treatment? It’s a fairly straightforward answer. MTBE can contaminate water and soil. It behaves differently in both. In soil for example, contrary to other contaminates, MTBE moves quickly. So it reaches deeper levels of the soil sooner and can reach the groundwater. As anyone can imagine this is non-desirable. An MTBE treatment is used to biodegrade MTBE and rapidly and economically remove it from water and soil to undetectable levels. Spills in the soil involving MTBE usually requires a much more aggressive treatment than spills involving gasoline for example.
When use a MTBE treatment?
A MTBE treatment is usually used when soil or water is contaminated by methyl tert-butyl ether. MTBE is an organic compound and is volatile, flammable, and a colorless liquid. This liquid however is soluble in water. Usually it’s used as a gasoline additive to raise the octane number. It helps the gasoline burn more completely and is a low cost liquid. Also it’s used as a soluble in labs, because it’s a fairly polar ether and has a reduced tendency to form explosive organic peroxides. It’s usually safe for years. However if this liquid hits the soil or drinking water, a MTBE treatment is advisable to make sure the water for example stays potable.
|MTBE treatment to clean soil and water|